Device Recall Hospira

General Hospital and Personal Use Devices

2

No

U.S. consignees nationwide.*** Foreign consignees in: Canada.

The Symbiq infusion pump is a device used in a health care facility to pump fluids into a patient in a controlled manner. It is intended primarily for use in the hospital setting and can be used in other acute and non-acute areas, such as, but not limited to, Nursing Homes, Mobile Intensive Care, Ambulatory Infusion, Centers, Hospice, Sub acute facilities, Outpatient/Surgical Centers, Long-term Care, Urgent Care, Transport, and Physician Offices.

PLum 360 devices with the following list number: 300100405, 300100406, 300100605 , 300101305 , 300102705 , 300105405 and 300106507.

General Hospital and Personal Use Devices

2

No

U.S. distribution : Natrionwide. Foreign :Brazil, Canada, Chile, Colombia, Ecuador, Guatemala, Mexico, Oman, Peru, Taiwan, Turkey, United Kingdom and Uruguay.

The Plum 360 is a large volume infuser capable of delivering fluids for a variety of therapies such as parenteral, enteral, or epidural infusions. The Plum 360 infuser can deliver fluids over a broad range of infusion rates and is capable of Concurrent delivery from one or more rigid or flexible fluid containers. The Plum 360 || infuser features Concurrent, Secondary, and Piggyback infusions. A positive valving cassette allows two lines to be delivered at independent rates. The volume to be infused (VTBI) is delivered through one line to a patient. The two lines can be delivered in Concurrent mode (together) or Piggyback mode (one after another) without raising or lowering I.V. bags. The Plum 360 infuser also enables fluid pathway troubleshooting such as removing proximal air in line, without is disconnecting the patient line. || The Plum 360 can act as a stand-alone infuser, or in conjunction with the Hospira MedNet software to provide medication safety software at the point of care, with customized drug libraries to support hospital defined protocols by || clinical care area. In such a configuration, the Plum 360 infuser can communicate with systems on the network via Ethernet or state of the art wireless communication using an 802.11 a/b/g/n/, 2.4 GHz/5 GHz dual-band radio. The Plum 360 infuser and Hospira MedNet software interface with other hospital systems such as Electronic Health records, Electronic Medication Administration Records, Bar Code Point of Care, Real Time Location Services, and there systems. || Each infuser includes a Connectivity Engine (CE) which provides both wired Ethernet and wireless 802.11 a/b/g/ networking capabilities. The Plum 360 infuser interfaces with Hospira MedNet application software to download drug library and infuser software updates and enable auto-programming of the infuser.The device may include means to detect a fault condition, such as air in, or blockage of, the infusion line and to activate an alarm.

PLum A+ devices with the following list numbers: 12391-04-25, 12391-22-05, 12391-23-05, 12391-23-15, 12391-36-07, 12391-54-05, 12391-88-01, 12391-88-02, 12391-88-03, 12391-88-04, 12391-88-05, 20792-04-25, 20792-13-09, 20792-57-15, 20792-65-01, 20792-65-02 and 20792-88-69.

General Hospital and Personal Use Devices

2

No

U.S. distribution : Natrionwide. Foreign :Brazil, Canada, Chile, Colombia, Ecuador, Guatemala, Mexico, Oman, Peru, Taiwan, Turkey, United Kingdom and Uruguay.

The Plum A+ is a dual-line volumetric infusion system designed to meet the growing demand for hospital-wide, as well as alternate site and home healthcare, standardization. With its primary line, secondary line, and piggyback fluid delivery capability, the Plum A+ is suited for a wide range of medical/surgical and critical care applications. Full compatibility with LifeCare Plum Series administration sets and accessories. || Each system includes a pumping module (hereafter called the infuser) and an assortment of disposable IV sets (hereafter called a set), and optional accessories. The Plum A+ host device contains a Connectivity Engine peripheral module that provides wired Ethernet and wireless 802.11 a/b/g local area networking capabilities. This allows the Hospira Mednet networked application software to download drug libraries to the infuser and enable the autoprogramming || feature.

List Numbers 16037-64-02 and 16037-64-03

General Hospital and Personal Use Devices

2

No

Worldwide Distribution - US including ND, TX, MI, MN, WI, IA, ME, HI, PA, MA, NJ, NY, CT, and Internationally to Canada.

Hospira MedNet Medication Management Suite software, version 6.1, List Numbers 16037-64-02 and 16037-64-03, in combination with the SapphirePlus 13.1x infusion pump || Hospira MedNet Medication Management Suite is intended to facilitate networked communication between compatible computer systems and Hospital infusion pumps.

List No. 11971-04 Plum A+ I.V. Infusion Pump; List No. 12391-04 Plum A+ I.V. Infusion Pump;  List No. 12618-04 Plum A+3 I.V. Infusion Pump;  List No. 12348-04 Plum A+3 I.V. Infusion Pump.  List Numbers: 12618-04; List Numbers: 11971-36; (shipped 12391-04; (shipped 11971-04; domestically) 11971-04; internationally) 12391-04;  12348-04; 12348-04;  12391-13; 12391-1312391-1   12618-04. All serial numbers of the above list numbered product are included in this correction.

General Hospital and Personal Use Devices

2

No

Product was distributed nationwide to 746 domestic consignees. Product was distributed internationally to the following countries: Puerto Rico, Canada, Saudi Arabia, Taiwan, Australia, Italy, Jordan, New Zealand, Spain, Turkey, and United Arab Emirates.

Hospira brand Plum A+I.V. Infusion Pump, List No. 11971-04; || Hospira brand Plum A+I.V. Infusion Pump, List No. 12391-04; || Hospira brand Plum A+3 I.V. Infusion Pump, List No. 12618-04; || Hospira brand Plum A+3 I.V. Infusion Pump, List No. 12348-04; || Infusion pump is a multi-function fluid delivery infusion system, consisting of pumping module and assortment of IV sets. || Product is manufactured and distributed by || Hospira Inc., 755 Jarvis Dr., Morgan Hill, CA