Artis Q and Q.zen Floorstand and ArtisQ and Q.zen Biplane Floorstand systems with SW version VD10E 의 리콜

Department of Health, Therapeutic Goods Administration에 따르면, 해당 리콜 는 Australia 에서 Siemens Healthcare Pty Ltd 에 의해 제조된 제품과 관련되어 있습니다.

이것은 무엇인가요?

의료기기에 문제가 생겼을 경우 제조사가 이를 바로잡거나 시장에서 회수하는 조치를 말한다. 회수(Recall)는 의료기기에 결함이 있거나, 건강에 위협이 되거나, 또는 결함도 있고 건강에도 위협이 될 경우에 발생한다.

데이터에 대해 더 자세히 알아보기 여기
  • 사례 유형
    Recall
  • 사례 ID
    RC-2015-RN-00626-1
  • 사례 위험등급
    Class II
  • 사례 시작날짜
    2015-07-14
  • 사례 국가
  • 사례 출처
    DHTGA
  • 사례 출처 URL
  • 비고 / 경고
    Australian data is current through July 2018. All of the data comes from the Australian Therapeutic Goods Administration, except for the categories Manufacturer Parent Company and Product Classification.
    The Parent Company and the Product Classification were added by ICIJ.
    The parent company information is based on 2017 public records. The device classification information comes from FDA’s Product Classification by Review Panel, based on matches of recall data from the U.S. and Australia.
  • 데이터 추가 비고
  • 원인
    If a position sensor fault in the swivel base axis is not detected by the system software, the c-arm system may move faster than normal when movement is enabled by the operator. the system will not move of its own accord, movement must still be initiated by the operator, however the system can unexpectedly exceed its usual speed, potentially resulting in a collision. there have been no complaints from australian customers regarding this issue.
  • 조치
    This issue will be remedied with software update AX037 /15/S (Patch 2). Following the installation of this update, the speed of the C-arm will be limited to a pre-determined level. This action has been closed-out on 12/08/2016.

Device

  • 모델명 / 제조번호(시리얼번호)
    Artis Q and Q.zen Floorstand and ArtisQ and Q.zen Biplane Floorstand systems with SW version VD10ECatalogue/Lot number – 10848280, 10848355, 10848282 with SW version VD10EARTG Number: 102177
  • Manufacturer

Manufacturer