ENDOEYE HD II Rigid Videoscope 의 리콜

Recall

RC-2017-RN-00197-1

Class I

2017-02-09

Australia

DHTGA

https://apps.tga.gov.au/Prod/sara/arn-detail.aspx?k=RC-2017-RN-00197-1

Olympus is extending the previous recall for product correction (tga ref.: rc-2015-rn-01141-1) from selected serial numbers to all serial numbers in the market. endoeye distal end can under certain circumstances become hot if the temperature sensor at the device’s tip is damaged (a mechanical breakage of the temperature sensor). although no patient or user injury has occurred as a result of this reported complaint, excessive heating of the endoeye distal end could result in patient or user injury.As part of the previous action selected serial numbers had the fog-free function disabled due to the backup mechanism (software) designed to detect and identify the failed temperature sensor was not functioning as expected, resulting in the potential for excessive heating if the sensor should fail. this was shortly followed by phase ii correction to replace the hardware (cable) and restore full functionality of the fog-free function.

Users are advised to discontinue the use of any affected devices in their inventory. Olympus Field Service will schedule a time for to deactivate the fog-free function on the device. The visualisation of the devices will be unaffected and they can be immediately returned to routine use following correction. Customers will be notified once Olympus has concluded the technical investigation and established the permanent solution.