Monitor AC3000 Spring Arm (component of Draeger ceiling pendant and light systems) 의 리콜

Recall

RC-2013-RN-01239-1

Class I

2013-11-28

Australia

DHTGA

https://apps.tga.gov.au/Prod/sara/arn-detail.aspx?k=RC-2013-RN-01239-1

The manufacturer has become aware of a case in which the monitor support bracket has detached from the joint pin at the bottom of the height adjustable ac3000 spring arm and fallen down together with the monitor until it was only held by the electrical cable connections. an inspection of a further seven monitor brackets in the same hospital identified severe wear on the ring groove responsible for the joint pin. investigation showed that the support shoulder of the locking element in the aluminum pin's groove is too low in an unfavorable tolerance position. the frequent movement of the arm under load may cause the locking element to damage the pin's groove and ultimately shear off, which may then result in the reported event.

Drager is advising users that the monitor arms will be inspected and repaired if required. Drager is also providing instructions to be followed by technically trained personnel, and will provide the required locking elements for replacement.