Commercial Name: Three-Dimensional Planning System for Eclipse Radiotherapy Technical Name: ANVISA Registration Number: 10405410007 Hazard Class: III Affected Model: Eclipse Serial Numbers Affected: H48J544 의 안전성 경고

Agência Nacional de Vigilância Sanitária (ANVISA)에 따르면, 해당 안전성 경고 는 Brazil 에서 Varian Medical Systems Brasil Ltda; Varian Medical Systems 에 의해 제조된 제품과 관련되어 있습니다.

이것은 무엇인가요?

안전성 경고는 의료기기 제품과 관련된 중요한 정보와 권고사항을 담고 있습니다. 물론 안전성 경고가 배포되었다고 해서 해당 제품이 무조건 안전하지 않은 제품이라는 것은 아닙니다. 보건의료업계 종사자와 의료기기 사용자들에게 배포되는 안전성 경고에는 회수(recall)도 포함될 수 있습니다. 제조사가 안전성 경고를 작성하기도 하지만, 보건당국에서 작성하는 경우도 있습니다.

데이터에 대해 더 자세히 알아보기 여기
  • 사례 유형
    Safety alert
  • 사례 ID
    2165
  • 날짜
    2017-02-13
  • 사례 국가
  • 사례 출처
    ANVISA
  • 사례 출처 URL
  • 비고 / 경고
    Brazilian data is current through June 2018. All of the data comes from Anvisa, except for the categories Manufacturer Parent Company and Product Classification.
    The Parent Company and the Product Classification were added by ICIJ.
    The parent company information is based on 2017 public records. The device classification information comes from FDA’s Product Classification by Review Panel, based on matches of data from the U.S. and Brazil.
  • 데이터 추가 비고
    The problem does not occur when additional changes are made to outline structures. The rescue process is performed correctly after performing the additional steps below. 1) Enable / disable the visibility of the structure; 2) Change the color of the structure; 3) Approve structure; 4) Undo and redo the last operation; or 5) Modify the structure with a tool other than Draw Planar Contour, Brush, Draw Geometrical Shape, or Eraser After you edit a structure, perform any of the five steps above and save. Check and approve structures after completing targeting to avoid using incomplete structures in treatment planning. Ensure that a qualified physician verifies the accuracy and placement of all patient structures (target structure and critical structures) used for treatment planning and to evaluate plans prior to patient treatment. #### UPDATED ON 08/24/2017, the company submitted completion report of the field action proving the accomplishment of correction as planned.
  • 원인
    Contours are not consistently saved after editing this occurs on systems that have been upgraded to eclipse version 13.6 mr2 in just a few specific changes. modifications made in version 13.6mr2 for the contouring, smartadapt ™, and smartsegmentation ™ workspaces result in inconsistently saved contours in eclipse. the anomaly is displayed when all of the following conditions occur: 1. the contours of the structure are modified using the draw planar contour, brush, draw geometrical shape, or eraser tools, ; e 2. no additional tools are applied to the structure; e 3. structural visibility, approval status, and structure properties are not changed. when all these conditions occur, the structure modification is not recognized or saved by the software version 13.6mr2.
  • 조치
    Field Action Code CP-28454 triggered under the responsibility of the company Varian Medical Systems Brazil Ltda. Company will make correction in the field.

Manufacturer