Equipment for angiography ALLURA XPER, brand PHILIPS, Risk class: III, model: ALLURA XPER FD10 (floor), ALLURA XPER FD10 (ceiling), ALLURA XPER FD20 (floor), ALLURA XPER FD20 (ceiling), Registry: 10216710153; ///// ALLURA XPER ANGIOGRAPHY EQUIPMENT, model: ALLURA XPER FD10 / 10; ALLURA XPER FD20 / 10; ALLURA XPER FD20 / 20; ALLURA XPER FD 20/15; ALLURA XPER FD10 / 10 OR Table; ALLURA XPER FD20 / 10 OR Table; ALLURA XPER FD20 / 20 OR Table; ALLURA XPER FD 20/15 OR Table .. hazard class III, registration 10216710206. /// Serial numbers: 722006; 722124. 의 안전성 경고

Agência Nacional de Vigilância Sanitária (ANVISA)에 따르면, 해당 안전성 경고 는 Brazil 에서 Philips Medical Systems Ltda.; Philips Medical Systems Nederland B.V. 에 의해 제조된 제품과 관련되어 있습니다.

이것은 무엇인가요?

안전성 경고는 의료기기 제품과 관련된 중요한 정보와 권고사항을 담고 있습니다. 물론 안전성 경고가 배포되었다고 해서 해당 제품이 무조건 안전하지 않은 제품이라는 것은 아닙니다. 보건의료업계 종사자와 의료기기 사용자들에게 배포되는 안전성 경고에는 회수(recall)도 포함될 수 있습니다. 제조사가 안전성 경고를 작성하기도 하지만, 보건당국에서 작성하는 경우도 있습니다.

데이터에 대해 더 자세히 알아보기 여기
  • 사례 유형
    Safety alert
  • 사례 ID
    1742
  • 날짜
    2015-11-09
  • 사례 국가
  • 사례 출처
    ANVISA
  • 사례 출처 URL
  • 비고 / 경고
    Brazilian data is current through June 2018. All of the data comes from Anvisa, except for the categories Manufacturer Parent Company and Product Classification.
    The Parent Company and the Product Classification were added by ICIJ.
    The parent company information is based on 2017 public records. The device classification information comes from FDA’s Product Classification by Review Panel, based on matches of data from the U.S. and Brazil.
  • 데이터 추가 비고
    According to the company, nonconformity does not directly cause a risky situation, however the beep is an available tool to help prevent unnecessary radiation on the patient. The field action application kits are still being prepared. #### UPDATED ON 07/18/2017, the company submitted a completion report of the field action proving the accomplishment of correction, as planned.
  • 원인
    Under certain circumstances, a software error may lead to a situation where the five-minute fluoroscopy beep is not emitted as required in 21cfr1020.32 (h) (2) (ii) and iec 60601-2-54 , clause 203.6.2.1.C. no injuries attributed to the problem were reported. it is an intermittent problem.
  • 조치
    The field action addresses problem correction through software update. A change request is being sent in order to request installation of the R2.x version of the software that solves the problem in the alarm. According to manufacturer, the non-emission of the audible alarm occurs very intermittently. The user should always observe the real-time dose information and cumulative fluoroscopy time provided by the system. The fault condition is reset when the case of a new patient is started or when the system is reset. Action code: FCO 72200287

Manufacturer