MYLA CLINIC PATCH 3.2. 0 CD; MYLA MASTER DVD 3.2 CLIN DL 380. Series Affected: CZ3506NWES; CZ3236VT9W; CZ3340PEAS; CZ3511512M; CZJ13001PNZ; CZ342682XS; CZ3349VSH6; CZJ2202C36; CZ342682XA; CZJ11900VQ; CZ3339NT8F; CZ3342RW86; CZ3506NWEJ; CZ3340PEAN; CZJ24109F3; CZ3339NT8LCZ3339NT8L; CZ3340PJ7N; CZ3349VSFX; CZC3340PEAR. 의 안전성 경고

Agência Nacional de Vigilância Sanitária (ANVISA)에 따르면, 해당 안전성 경고 는 Brazil 에서 Biomerieux Brasil SA.; BIOMERIEUX S.A 에 의해 제조된 제품과 관련되어 있습니다.

이것은 무엇인가요?

안전성 경고는 의료기기 제품과 관련된 중요한 정보와 권고사항을 담고 있습니다. 물론 안전성 경고가 배포되었다고 해서 해당 제품이 무조건 안전하지 않은 제품이라는 것은 아닙니다. 보건의료업계 종사자와 의료기기 사용자들에게 배포되는 안전성 경고에는 회수(recall)도 포함될 수 있습니다. 제조사가 안전성 경고를 작성하기도 하지만, 보건당국에서 작성하는 경우도 있습니다.

데이터에 대해 더 자세히 알아보기 여기
  • 사례 유형
    Safety alert
  • 사례 ID
    1775
  • 날짜
    2015-12-18
  • 사례 국가
  • 사례 출처
    ANVISA
  • 사례 출처 URL
  • 비고 / 경고
    Brazilian data is current through June 2018. All of the data comes from Anvisa, except for the categories Manufacturer Parent Company and Product Classification.
    The Parent Company and the Product Classification were added by ICIJ.
    The parent company information is based on 2017 public records. The device classification information comes from FDA’s Product Classification by Review Panel, based on matches of data from the U.S. and Brazil.
  • 데이터 추가 비고
    The MYLA allows the reuse of a sample ID and / or patient ID to enable alignment of its functionality to the LIS requirements. As part of this feature, an ID (sample or patient) is active in MYLA for a certain period. The "active" status (using that number) is set to 28 days by default. However, it can be configured by the user for a different specific time period. In this time period, if a sample with a patient ID is "active," any result associated with a sample ID received by the MYLA will be compared to find the active sample ID, thus associating the result with the request. Note: The request from the LIS contains the Sample ID, Patient ID, and other demographic information. If no active sample ID is found, MYLA manages this result as an orphan and is sent to the LIS without a patient ID. At the same time, this orphaned result is stored in MYLA to wait for a LIS request that contains this unknown sample ID. The MYLA allows the management of results received from a connected instrument before the corresponding request is sent from the LIS to the MYLA (EX: in case of emergency at night). //// In considering the problem affecting this field action, there is a possibility that results are associated with the incorrect patient and erroneously transferred to the LIS. In the case where erroneous results are delivered to the physician, the impact to the patient will depend on the severity of the infection, the coexisting morbidities, the adequacy of the empirical antibiotic therapy, the need for additional diagnoses or therapeutic intervention. These cases may also lead to the use of inappropriate antibiotics to the patient. Additional details are described in the Customer Letter (attached). ### Update of the field action: UPDATED ON 07/28/2017, the company presented the completion report of the field action proving the sending of the safety notice to the client.
  • 원인
    Under certain conditions, the myla sotware, when connected to a vitek2 system and a laboratory information system (lis), where it is permitted to reuse the specimen id number, presents a possibility of associating a result of vitek2 with wrong patient and then send this result to the lis when that result is not validated and / or released at the correct time.
  • 조치
    Software update. Action code: FSCA 2695. BioMérieux will deliver a Letter to clients requesting that they certify that it has been distributed and reviewed by all personnel involved in the organization. You will be required to regularly review and validate the results on VITEK2 so that there are no "overhaul" results older than the "Patient / Sample Reuse" period set up within your MYLA software. BioMérieux will develop a software solution to reduce the likelihood of this problem occurring and also request that you complete and return the Recognition Form to confirm receipt of the notification.

Manufacturer