Trade name: Core Valve Evolut A / R Transcatheter Valve R //. Technical Name: Cardiac Valve Prosthesis //. ANVISA registration number: 10339190629 //. Risk class: IV (Maximum Risk) //. Affected Model (s) and Batch (s) / Serial Number (s) Affected. Attached distribution list 의 안전성 경고

Agência Nacional de Vigilância Sanitária (ANVISA)에 따르면, 해당 안전성 경고 는 Brazil 에서 MEDTRONIC COMERCIAL LTDA 에 의해 제조된 제품과 관련되어 있습니다.

이것은 무엇인가요?

안전성 경고는 의료기기 제품과 관련된 중요한 정보와 권고사항을 담고 있습니다. 물론 안전성 경고가 배포되었다고 해서 해당 제품이 무조건 안전하지 않은 제품이라는 것은 아닙니다. 보건의료업계 종사자와 의료기기 사용자들에게 배포되는 안전성 경고에는 회수(recall)도 포함될 수 있습니다. 제조사가 안전성 경고를 작성하기도 하지만, 보건당국에서 작성하는 경우도 있습니다.

데이터에 대해 더 자세히 알아보기 여기
  • 사례 유형
    Safety alert
  • 사례 ID
    1962
  • 날짜
    2016-08-03
  • 사례 국가
  • 사례 출처
    ANVISA
  • 사례 출처 URL
  • 비고 / 경고
    Brazilian data is current through June 2018. All of the data comes from Anvisa, except for the categories Manufacturer Parent Company and Product Classification.
    The Parent Company and the Product Classification were added by ICIJ.
    The parent company information is based on 2017 public records. The device classification information comes from FDA’s Product Classification by Review Panel, based on matches of data from the U.S. and Brazil.
  • 데이터 추가 비고
    The recommendations below are intended for physicians / health professionals, and further details of the guidelines can be found in the FA729 Customer Letter: 1) Patient anatomy considerations: Physicians should consider whether complex anatomical configurations, including combinations of two or more traits below, raise the risk of vascular trauma. 2) Procedure Use: During the advancement of the introduction system, enlarge the images sufficiently to allow the tip of the capsule to be viewed relative to the vasculature of the patient. If you observe the tip of the infeed folding system in a different direction from the infeed cap, do not force the infeed. Instead, retract the introduction system to a straight part of the descending aorta, reorient it by rotating the 90 degree introductory system and restart the passage very carefully. 3) Use of the procedure: If significant resistance is encountered during the advance of the introduction system, do not force the passage. Use magnification of fluoroscopy to evaluate the vasculature. If no damage is identified, retract the delivery system to a straight portion of the descending aorta and consider the actions outlined in the FA729 Customer Letter. If you wish to notify technical complaints and adverse events use the following channels: Notivisa: Notices of adverse events (AE) and technical complaints (QT) for products subject to Sanitary Surveillance should be made through the NOTIVISA System. To access the System, you must register and select the Health Professional option, if you are a liberal professional or the Institution / Entity option, if you are a professional of an institution / entity. Technovigilance System: Patient or citizen can notify through the Technovigilance System / SISTEC access through the link
  • 원인
    Possible vascular trauma using medtronic's enveo ™ r catheter entry system (dcs). although reports of vascular trauma received by medtronic were not frequent (0.136%, 39 events), they contained serious results, including death of patients (19 events). the field action, as described in the enclosed customer letter fa729, encompasses two distinct models of the core valve evolut r aortic transcatheter valve, these models are: 1. enveor-l; and 2.Enveor-lc. however in brazil, medtronic holds the registration and commercializes the model enveor-l (registration no.: 10339190629).
  • 조치
    Field Action No. FA729 triggered under the responsibility of the company MEDTRONIC COMERCIAL LTDA. The Field Action is an update of the instructions for use. Recommendations for Physicians / Health Practitioners: 1) Patient Anatomy Considerations: Physicians should consider whether complex anatomical configurations, including combinations of two or more traits below, increase the risk of vascular trauma. 2) Procedure Use: During the advancement of the introduction system, enlarge the images sufficiently to allow the tip of the capsule to be viewed relative to the vasculature of the patient. If you observe the tip of the infeed folding system in a different direction from the infeed cap, do not force the infeed. Instead, retract the introduction system to a straight part of the descending aorta, reorient it by rotating the 90 degree introductory system and restart the passage very carefully. 3) Use of the procedure: If significant resistance is encountered during the advance of the introduction system, do not force the passage. Use magnification of fluoroscopy to evaluate the vasculature. If no damage is identified, retract the delivery system to a straight portion of the descending aorta and consider the actions outlined in the FA729 Customer Letter.

Manufacturer

  • Source
    ANVSANVISA