Alaris Pump Module 의 안전성 경고

Department of Health에 따르면, 해당 안전성 경고 는 Hong Kong 에서 CareFusion Inc 에 의해 제조된 제품과 관련되어 있습니다.

이것은 무엇인가요?

안전성 경고는 의료기기 제품과 관련된 중요한 정보와 권고사항을 담고 있습니다. 물론 안전성 경고가 배포되었다고 해서 해당 제품이 무조건 안전하지 않은 제품이라는 것은 아닙니다. 보건의료업계 종사자와 의료기기 사용자들에게 배포되는 안전성 경고에는 회수(recall)도 포함될 수 있습니다. 제조사가 안전성 경고를 작성하기도 하지만, 보건당국에서 작성하는 경우도 있습니다.

데이터에 대해 더 자세히 알아보기 여기
  • 사례 유형
    Safety alert
  • 날짜
    2014-05-21
  • 사례 출판 날짜
    2014-05-21
  • 사례 국가
  • 사례 출처
    DH
  • 사례 출처 URL
  • 비고 / 경고
    Hong Kong data is current through September 2018. All of the data comes from the Department of Health (Hong Kong), except for the categories Manufacturer Parent Company and Product Classification.
    The Parent Company and the Product Classification were added by ICIJ.
    The parent company information is based on 2017 public records. The device classification information comes from FDA’s Product Classification by Review Panel, based on matches of data from the U.S. and Hong Kong.
  • 데이터 추가 비고
    Medical Device Safety Alert
  • 원인
    Medical device safety alert: carefusion alaris pump module the united states food and drug administration (fda) has issued a medical device safety alert concerning alaris pump module (model 8100) with software version 9.1.18 manufactured by carefusion inc. the affected devices were manufactured from 6 february, 2014 to 8 april, 2014 and distributed from 7 february, 2014 through 7 april, 2014. the manufacturer is recalling the alaris pump model 8100, version 9.1.18, because it may have a software failure where the pump module will not properly delay an infusion when the "delay until" option or "multidose" feature is used. the firm received one report where the device malfunctioned when the “delay until” option was selected. the software failure also causes the pump to not properly deliver a multidose infusion as expected under the following conditions: when the first dose is programmed to infuse when the system time is earlier than 7 pm (19:00) and a subsequent dose is intended to infuse between 19:00 and 11:59 pm (23:59); and when the first dose is programmed to infuse when the system time is between 19:00 and 23:59 and a subsequent dose is intended to infuse between 12 am (00:00) and 6:59 pm (18:59) the next day. affected customers were informed that if the infusion starts earlier or later than intended and is not immediately detected and stopped by the clinician, serious injury or death could result. the manufacturer advises users not to use the alaris pump module “delay until” option and not to use the “multidose” feature. furthermore, the manufacturer will contact all affected customers to schedule the installation of software version 9.1.17. as an interim guidance, customers may update their dataset to disable both delay options and/or multidose across all profiles to prevent the use of “delay until” option and/or “multidose” feature. these are shared configurations with the alaris syringe module and if disabled would prevent use of these features with the alaris syringe module as well. for details, please refer to the following fda website:http://www.Fda.Gov/medicaldevices/safety/listofrecalls/ucm398178.Htm if you are in possession of the affected products, please contact your supplier for necessary actions. posted on 21 may 2014.

Device

Manufacturer