Brightview XCT 의 리콜

New Zealand Medicines and Medical Devices Safety Authority에 따르면, 해당 리콜 는 New Zealand 에서 Philips Medical Systems (USA) 에 의해 제조된 제품과 관련되어 있습니다.

이것은 무엇인가요?

의료기기에 문제가 생겼을 경우 제조사가 이를 바로잡거나 시장에서 회수하는 조치를 말한다. 회수(Recall)는 의료기기에 결함이 있거나, 건강에 위협이 되거나, 또는 결함도 있고 건강에도 위협이 될 경우에 발생한다.

데이터에 대해 더 자세히 알아보기 여기
  • 사례 유형
    Recall
  • 사례 ID
    21124
  • 사례 시작날짜
    2017-02-21
  • 사례 국가
  • 사례 출처
    NZMMDSA
  • 사례 출처 URL
  • 비고 / 경고
    Data from New Zealand is current through July 2018. All of the data comes from the New Zealand Medicines and Medical Devices Safety Authority, except for the categories Manufacturer Parent Company and Product Classification.
    The Parent Company and the Product Classification were added by ICIJ.
    The parent company information is based on 2017 public records. The device classification information comes from FDA’s Product Classification by Review Panel, based on matches of recall data from the U.S. and New Zealand.
  • 데이터 추가 비고
    Recalling Organisation: Philips New Zealand Commercial Limited, Level 3, 123 Carlton Gore Road, Newmarket, AUCKLAND 1023
  • 원인
    The manufacturer has become aware of a potential problem with brightview xct, with software issues in 2.5.5 and earlier., issue 1 - motion controller emit the warning message, occasionally, the system may stop and you may receive a "xct scan did not complete successfully"., issue 2 - door interlock switch with x ray perform, system was unable to perform an x-ray scan, after the system displays a "xct door interlock error., issue 3 - detector contacts head holder when performing patient unload, when performing a preprogrammed motion (ppm) to unload the patient, the detector will contact the head holder under the following circumstances:, - head holder installed, - rel-180 detector orientation, - gantry rotate angle between 45° and 55°, issue 4 - jetstream freezes during gated planar scan, when acquiring a gated planar scan (muga - multi gated acquisition) on a patient with an irregular heartbeat, you may encounter a situation where the acquisition station locks at 100% complete.
  • 조치
    Software to be upgraded

Device

  • 모델명 / 제조번호(시리얼번호)
    Model: , Affected: Software Issues:2.5.1, 2.5.2, 2.5.3, 2.5.4 and 2.5.5
  • Manufacturer

Manufacturer

  • 제조사 모회사 (2017)
  • Source
    NZMMDSA