Device Recall Autostainer Link 48, Autostainer Plus, Autostainer, and Autostainer Link Instrument 의 리콜

U.S. Food and Drug Administration에 따르면, 해당 리콜 는 United States 에서 Dako North America Inc. 에 의해 제조된 제품과 관련되어 있습니다.

이것은 무엇인가요?

의료기기에 문제가 생겼을 경우 제조사가 이를 바로잡거나 시장에서 회수하는 조치를 말한다. 회수(Recall)는 의료기기에 결함이 있거나, 건강에 위협이 되거나, 또는 결함도 있고 건강에도 위협이 될 경우에 발생한다.

데이터에 대해 더 자세히 알아보기 여기
  • 사례 유형
    Recall
  • 사례 ID
    70558
  • 사례 위험등급
    Class 2
  • 사례 연번
    Z-1261-2015
  • 사례 시작날짜
    2015-02-12
  • 사례 출판 날짜
    2015-03-16
  • 사례 상황
    Terminated
  • 사례 국가
  • 사례 종료 날짜
    2016-02-11
  • 사례 출처
    USFDA
  • 사례 출처 URL
  • 비고 / 경고
    U.S. data is current through June 2018. All of the data comes from the U.S. Food and Drug Administration, except for the category Manufacturer Parent Company.
    The Parent Company was added by ICIJ.
    The parent company information is based on 2017 public records.
  • 데이터 추가 비고
    Slide stainer, automated - Product Code KPA
  • 원인
    A false negative result affecting the diagnosis may occur. a defect in the syringe assembly stopcock component may, in some circumstances, cause leakage of excess buffer onto slide location 34 on the as480, or slide locations 35 and 36 on the as100, s3400, and s3800. affected dates are from 12/2013-08/2014.
  • 조치
    The firm, Dako, sent an "Urgent Medical Device Recall Notification" letter dated 2/12/15 to customer on 02/12/15. The firm's letter advised customers to do the following: The firm stated that customers can continue to use the instrument however should take the following actions: - Discontinue to use the HercepTest on slide location 34 - As set forth in Dako's staining protocol, use on-slide positive controls and two drop zones - Watch for any indication of buffer leakage from they syringe assembly. This can be done easily when the tubes are checked for air bubbles in connection with exchange of the buffer bottle - Check for weak staining in regards to HercepTest in slide position 34. Dako's Actions: Dako states that a representative will contact the customers within the next few weeks in order to determine whether the HercepTest has been used for staining slides in position 34. The firm has identified a longer term corrective action plan of installing a drip tray under the stopcock and states that a representative will contact the customer when it is available. Transmission of Notice: The firm requests that customers inform those that need to be aware of the notification and to where the instruments might have been transferred to. The firm states that customers should ensure the organizations maintains awareness of the noticed and recommended steps until the corrective actions have been completed. The firm also asks customers to complete, sign, and return the attached recall form as soon as possible. On 02/23/15 the firm sent out a second notification letter to customers with the following additional recommendations: - Discontinue the use of HercepTest in slide location 34, 35, and 36 depending on the make and model of the instrument In addition the firm recommended that customers pay special attention to any indication that leakage has compromised staining. -When staining using the HercepTest protocols, excess leakage from the sy

Device

  • 모델명 / 제조번호(시리얼번호)
    992640 Rev. 02, 992085 Rev.no H, 992625 Rev.no F, 992326 Rev.no C  Affected dates: 12/2013-08/2014  Each device is labeled with a unique serial number.  Catalog/Model Number: - AS480 - S3800 - S3400 - AS100
  • 의료기기 분류등급
  • 의료기기 등급
    1
  • 이식된 장치?
    No
  • 유통
    Worldwide Distribution: US (nationwide) and countries of: AT, AU, BE, CA, CH, DE, DK, ES, FR, GB, IE, IT, JP, NL, NO, PL, and SE.
  • 제품 설명
    Autostainer Link 48 (AS480), Autostainer Plus Link Instrument (AS100), Autostainer (S3400), and Autostainer Plus (S3800). Automated slide stainer for in vitro diagnostic use.
  • Manufacturer

Manufacturer

  • 제조사 주소
    Dako North America Inc., 6392 Via Real, Carpinteria CA 93013-2921
  • 제조사 모회사 (2017)
  • Source
    USFDA