Device Recall SERVO Ventilator 300A 의 리콜

U.S. Food and Drug Administration에 따르면, 해당 리콜 는 United States 에서 MAQUET Inc. 에 의해 제조된 제품과 관련되어 있습니다.

이것은 무엇인가요?

의료기기에 문제가 생겼을 경우 제조사가 이를 바로잡거나 시장에서 회수하는 조치를 말한다. 회수(Recall)는 의료기기에 결함이 있거나, 건강에 위협이 되거나, 또는 결함도 있고 건강에도 위협이 될 경우에 발생한다.

데이터에 대해 더 자세히 알아보기 여기
  • 사례 유형
    Recall
  • 사례 ID
    50676
  • 사례 위험등급
    Class 2
  • 사례 연번
    Z-0872-2009
  • 사례 시작날짜
    2008-12-19
  • 사례 출판 날짜
    2009-02-03
  • 사례 상황
    Terminated
  • 사례 국가
  • 사례 종료 날짜
    2009-07-08
  • 사례 출처
    USFDA
  • 사례 출처 URL
  • 비고 / 경고
    U.S. data is current through June 2018. All of the data comes from the U.S. Food and Drug Administration, except for the category Manufacturer Parent Company.
    The Parent Company was added by ICIJ.
    The parent company information is based on 2017 public records.
  • 데이터 추가 비고
    Ventilator, continuous, facility use - Product Code CBK
  • 원인
    Servo ventilator 300a could cause hypoventilation if the use of the pc or prvc mode with the automode function set to "on" in neonatal and pediatric patient ranges with small tidal volumes and short set inspiratory rise time.
  • 조치
    URGENT: Device Correction letters were sent out on December 22, 2008. Letters alert users to the potential problem and the situation in which it may occur. Letter indicate the set inspiratory rise time should be set in the range of 7-10% and that the humidifier chamber water level be maintained according to manufacturers instructions. The letter is enclosed as a supplement to the SV300A Operating Manual. Consignees were directed to complete a "Device Correction-Customer Fax Response" to indicate number of units of the affected product and that they followed the instructions for including the attached supplemental instructions to the operating manual. For questions about the recall, contact your local Maquet, Inc. representative.

Device

  • 모델명 / 제조번호(시리얼번호)
    All units of SV300A.
  • 의료기기 분류등급
  • 의료기기 등급
    2
  • 이식된 장치?
    No
  • 유통
    Nationwide
  • 제품 설명
    SERVO Ventilator 300A (SV300A); || Maquet Critical Care Ab, Solna, Sweden. || The device is intended for general and critical ventilatory care of adult, pediatric, infant and neonatal patients. The unit is designed to be used at the bedside and for intra-hospital transport. It is not intended for transport use in ambulances or in helicopters in the US market.
  • Manufacturer

Manufacturer

  • 제조사 주소
    MAQUET Inc., 1140 Us Highway 22 Ste 202, Bridgewater NJ 08807-2958
  • 제조사 모회사 (2017)
  • Source
    USFDA