Device Recall Siemens RAPEDPoint500 의 리콜

U.S. Food and Drug Administration에 따르면, 해당 리콜 는 United States 에서 Siemens Healthcare Diagnostics Inc 에 의해 제조된 제품과 관련되어 있습니다.

이것은 무엇인가요?

의료기기에 문제가 생겼을 경우 제조사가 이를 바로잡거나 시장에서 회수하는 조치를 말한다. 회수(Recall)는 의료기기에 결함이 있거나, 건강에 위협이 되거나, 또는 결함도 있고 건강에도 위협이 될 경우에 발생한다.

데이터에 대해 더 자세히 알아보기 여기
  • 사례 유형
    Recall
  • 사례 ID
    74564
  • 사례 위험등급
    Class 3
  • 사례 연번
    Z-2601-2016
  • 사례 시작날짜
    2016-07-05
  • 사례 출판 날짜
    2016-08-19
  • 사례 상황
    Terminated
  • 사례 국가
  • 사례 종료 날짜
    2017-08-02
  • 사례 출처
    USFDA
  • 사례 출처 URL
  • 비고 / 경고
    U.S. data is current through June 2018. All of the data comes from the U.S. Food and Drug Administration, except for the category Manufacturer Parent Company.
    The Parent Company was added by ICIJ.
    The parent company information is based on 2017 public records.
  • 데이터 추가 비고
    Acid, lactic, enzymatic method - Product Code KHP
  • 원인
    Some v2.2.2 upgrade kits include a dialysate mode which not cleared/approved for shipment in the united states.
  • 조치
    Siemens sent a Customer Notification dated July 2016 to all affected domestic (US) customers via Federal Express on July 5, 2016. Customers were asked to take the following actions: Please do not use the dialysate mode. If you have enabled this feature, please disable it by following these instructions: 1. At the System screen, select Setup. 2. Select Secured Options > Analysis Options. 3. Unselect Dialysate. 4. Select the Continue button 3 times. Please review this letter with your Medical Director. Complete and return the Field Correction Effectiveness Check attached to this letter within 7 days. Customers with questions were instructed to contact their Siemens Customer Care Center or their local Siemens Technical Support representative. For questions regarding this recall call 781-269-3000.

Device

  • 모델명 / 제조번호(시리얼번호)
    Software Version 2.2A
  • 의료기기 분류등급
  • 의료기기 등급
    1
  • 이식된 장치?
    No
  • 유통
    Nationwide Distribution to AL, CA, MA, NJ, OH, TX, WA, PA
  • 제품 설명
    Siemens RAPIDPoint¿ 500 v2.2.2A Software Upgrade Kit; SMN 11066719, Software Version 2.2A || The RAPIDPoint 500 system is designed for professional use in a point-of care or laboratory environment. This system tests blood gases, electrolytes, metabolites, total hemoglobin, and hemoglobin derivatives in arterial, venous, and capillary whole blood samples. The following parameters are tested: pH, pC02, p02, Na+, K+, Ca++, Cl-, glucose, lactate, tHb, F02Hb, FCOHb, FMetHb, FHHb, nBili
  • Manufacturer

Manufacturer

  • 제조사 주소
    Siemens Healthcare Diagnostics Inc, 2 Edgewater Dr, Norwood MA 02062-4637
  • 제조사 모회사 (2017)
  • Source
    USFDA