Events

Device Recall Stryker BAM (SHAPE) ARM, LEFT 의 리콜

U.S. Food and Drug Administration에 따르면, 해당 리콜 는 United States 에서 Stryker Communications 에 의해 제조된 제품과 관련되어 있습니다.

이것은 무엇인가요?

의료기기에 문제가 생겼을 경우 제조사가 이를 바로잡거나 시장에서 회수하는 조치를 말한다. 회수(Recall)는 의료기기에 결함이 있거나, 건강에 위협이 되거나, 또는 결함도 있고 건강에도 위협이 될 경우에 발생한다.

데이터에 대해 더 자세히 알아보기 여기
  • 사례 유형
    Recall
  • 사례 ID
    67813
  • 사례 위험등급
    Class 2
  • 사례 연번
    Z-2055-2014
  • 사례 시작날짜
    2014-03-17
  • 사례 출판 날짜
    2014-07-15
  • 사례 상황
    Terminated
  • 사례 국가
    United States
  • 사례 종료 날짜
    2015-05-15
  • 사례 출처
    USFDA
  • 사례 출처 URL
    https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfres/res.cfm?id=128239
  • 비고 / 경고
    U.S. data is current through June 2018. All of the data comes from the U.S. Food and Drug Administration, except for the category Manufacturer Parent Company.
    The Parent Company was added by ICIJ.
    The parent company information is based on 2017 public records.
  • 데이터 추가 비고
    medical equipment support boom - Product Code BRY
  • 원인
    During the use of the shape arm there is the potential for the monitor mount to come off of the shape arm if the lock washer and screw are not present.
  • 조치
    Direct accounts in the US were notified by letter dated March 21, 2014, and asked to report any malfunctions to Stryker Communications immediately. In addition, Stryker Representatives will visit all US accounts to inspect all the product units on hand. If needed, Representatives will check that black, screw/lock washers supplied by Stryker are secured in place and will replace any that are not the typed furnished by Stryker. All units will be updated with a yellow, warning sticker on the monitor bracket which reads: "Failure to properly install the screw and lock washer below can result in the attached component/equipment falling." Stryker Communications' foreign distributors will oversee notification, inspection, and corrections of their accounts and report corrections and other findings to Stryker Communications.

Device

Device Recall Stryker BAM (SHAPE) ARM, LEFT
  • 모델명 / 제조번호(시리얼번호)
    Serial numbers 080924DC001 through 120227DC025 Serial and part numbers are located on underside of the cover of the portion of the Arm that is attached to the boom's service head. Screws must be removed and the cover detached to view these numbers.
  • 의료기기 분류등급
    Anesthesiology Devices
  • 의료기기 등급
    1
  • 이식된 장치?
    No
  • 유통
    Worldwide Distribution. US nationwide including Puerto Rico, China, Philippines, Mexico, Korea, Japan, Colombia, Chile, Canada, Brazil, and Australia
  • 제품 설명
    BAM (SHAPE) ARM, LEFT, an articulating, arm bracket that is attached to the service head of boom systems which are used for supporting and positioning equipment in operating rooms and patient care areas. The product comes as component of kit part number 0682000976, and the Arm part number in the kit is P17087. The kit, when assembled, supports a flat-panel video monitor that is attached to one of two types of Stryker Communications boom systems, EDS or FLEXiS.
  • Manufacturer
    Stryker Communications

Manufacturer

Stryker Communications
  • 제조사 주소
    Stryker Communications, 1410 Lakeside Pkwy Ste 100, Flower Mound TX 75028-4026
  • 제조사 모회사 (2017)
    Stryker
  • Source
    USFDA