Events

Siemens User Defined Method Flex Assignment/Dimension Vista 500 Dimension Vista 1500 System 의 리콜

U.S. Food and Drug Administration에 따르면, 해당 리콜 는 United States 에서 Siemens Healthcare Diagnostics, Inc. 에 의해 제조된 제품과 관련되어 있습니다.

이것은 무엇인가요?

의료기기에 문제가 생겼을 경우 제조사가 이를 바로잡거나 시장에서 회수하는 조치를 말한다. 회수(Recall)는 의료기기에 결함이 있거나, 건강에 위협이 되거나, 또는 결함도 있고 건강에도 위협이 될 경우에 발생한다.

데이터에 대해 더 자세히 알아보기 여기
  • 사례 유형
    Recall
  • 사례 ID
    66585
  • 사례 위험등급
    Class 2
  • 사례 연번
    Z-0851-2014
  • 사례 시작날짜
    2013-10-07
  • 사례 출판 날짜
    2014-01-28
  • 사례 상황
    Terminated
  • 사례 국가
    United States
  • 사례 종료 날짜
    2014-08-27
  • 사례 출처
    USFDA
  • 사례 출처 URL
    https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfres/res.cfm?id=122654
  • 비고 / 경고
    U.S. data is current through June 2018. All of the data comes from the U.S. Food and Drug Administration, except for the category Manufacturer Parent Company.
    The Parent Company was added by ICIJ.
    The parent company information is based on 2017 public records.
  • 데이터 추가 비고
    Analyzer, chemistry (photometric, discrete), for clinical use - Product Code JJE
  • 원인
    When utilizing the routine inventory screen to enter a user defined method (empty) flex the system may assign the user defined method flex to a different flex that is currently in inventory on the system, and then use the incorrect flex cartridge to process the user defined method.
  • 조치
    Siemens sent a Urgent Medical Device Correction letter dated October 2013, to all affected customers. The letter identified the product the problem and the action needed to be taken by the customer. Please use the following actions if using Vista SW Versions 3.5.1 and below to prevent the issue from occurring: 1. When assigning a User Defined (EMPTY) Flex, use the Advanced Inventory Screen per the Operators Guide. 2. Verify that EMPTY Flex is no longer listed in the inventory before proceeding with any testing. 3. If the EMPTY Flex is still listed in the inventory, contact your Siemens Customer Care Center - Technical Solutions for assistance. Please retain this letter with your laboratory records and forward this letter to those who may have received this product. Discuss the content of this letter with your Medical Director. We apologize for the inconvenience this situation has caused. If you have any questions, please contact your Siemens Customer Care Center - Technical Solutions at (800-441-9250) or your local Siemens technical support representative.

Device

Siemens User Defined Method Flex Assignment/Dimension Vista 500 Dimension Vista 1500 System
  • 모델명 / 제조번호(시리얼번호)
    Material numbers 10284473, 10488224, 10444801, and 10444802.
  • 의료기기 분류등급
    Clinical Chemistry and Clinical Toxicology Devices
  • 의료기기 등급
    1
  • 이식된 장치?
    No
  • 유통
    USA (nationwide) Distribution including Puerto Rico.
  • 제품 설명
    User Defined Method Flex Assignment/Siemens Dimension Vista 500 or Dimension Vista 1500 System with software version 3.5.1 or lower || User Defined Method Flex Assignment/Siemens Dimension Vista 500 or Dimension Vista 1500 System is an in vitro diagnostic device intended to duplicate manual analytical procedures such as pipetting, mixing, heating, and measuring spectral intensities to determine a variety of analytes in human body fluids.
  • Manufacturer
    Siemens Healthcare Diagnostics, Inc.

Manufacturer

Siemens Healthcare Diagnostics, Inc.
  • 제조사 주소
    Siemens Healthcare Diagnostics, Inc., 500 Gbc Dr Ms 514, PO BOX 6101, Newark DE 19702-2466
  • 제조사 모회사 (2017)
    Siemens Ag
  • Source
    USFDA